Spray booth HC900

Outside size：

7010 x 5570 x 3810 mm （L x W x H）

Inside size：

6900 x 4000 x 2800 mm （L x W x H）

Foundation and floor

Foundation

Full metal foundation, full grids, the grids are suppressive type of steel grating instead of traditional twisted steel for the cross bar steel grating. The biggest features for it are beautiful, durable and better force bearing.  

Surface area of foundation

27 M²（full galvanized grids）

metal basement

350mm height, the ventilation effect is better than traditional spray booth.

Drive-in ramps

3 big drive-in ramps,  each size: 2000x1030mm, diamond plate structure. 

Wall and door

Wallboard and roof panel

High quality double construction fireproof insulation rock wool panel, thickness: 50mm

3-folded entrance door with safety glass window

1set，size: 3200x2700 mm（B x H）, size is bigger than traditional spray booth.

Operator’s door with safety glass window

800x2000mm（B x H）the top of service door installs door closer to close the door automatically

Lighting

Ceiling lighting

8units，each 4 x 36 W, total 1152w , adopt Germany OSRAM Lamp, grade of lighting box’s dustproof and waterproof reach IP54 grade.

Side lighting

8units，each 2 x 36 W, total 576w, adopt Germany OSRAM Lamp, grade of lighting box’s dustproof and waterproof reach IP54 grade.

Brightness

≥1000 LUX

Filtration system

Pre-filters

EU3 grade pocket filter system, filtration effect is much better

Ceiling filter

EU5 grade high efficient filter

Bottom filter and exhaust filter

Fibreglass paint-stop filter

Ventilation system

Inlet fan （Direct drive motor）

Adopt big impeller turbo fan,  7.5KW，380V，50HZ

Outlet fan（Direct drive motor）

Adopt big impeller turbo fan,  5.5KW，380V，50HZ

Painting and baking exchange system

Solenoid valve+ pressure adjustment control cylinder driven damper exchange 

Total fan capacity

25.000m³/h 

Air flow speed in cabin

0.23m/s in empty booth, 0.25－0.35m/s in loaded booth

Heating system

Heating exchanger material

Adopt high efficient heat-resistant stainless steel as cycling heat exchanger

Heating exchanger capacity

200KW(260.000Kcal/H) 

Burner model

Adopt Italy REILLO two-ranges diesel burner RG5D（260.000kcal/H）, quicker heating and much better effect, more rest assure for quality

Heating time

3-5 minutes( from 20°C to 60°C) under baking status, the max baking temperature is 80°C

Control board

Control system

Standard Y/Δ step-down start control system

PLC controller 

Yes, PLC control, more reliable and lower breakdown rate

Human-computer interface touching screen control

Yes, touching screen control, easier to operate

Pressure testing

The pressure gauge indicate the pressure inside cabin

Function

Painting, warm painting, baking, emergency stop switch, alarm indication, failure indication, over-temperature alarm indication, baking delay stop protection